主頁 > 知識庫 > linux系統維護常見錯誤記錄

linux系統維護常見錯誤記錄

熱門標簽:孝感營銷電銷機器人源碼 AI電銷機器人PHP源碼 智能電話機器人金融 騰訊美術館地圖標注 打電話機器人是什么軟件 鄭州智能外呼系統招商 思茅地圖標注app 沈陽藝匯通地圖標注 ai電銷機器人自動篩選意向客戶
一:卸載的時候出現的錯誤:
umount /dev/nb1
device is busy
解決:找到是什么進程使得他busy,用 lsof /dev/nb1 . kill掉那個進程,然后重新umount即可。

二:GD2編譯的時候出現的錯誤:
The usual way to define `LIBTOOL’ is to add `AC_PROG_LIBTOOL’
Libtool library used but `LIBTOOL’ is undefined
[Makefile.in] Error 1
解決:缺少編譯安裝的軟件包。如:yum install automake,libjpeg-devel,libpng-devel,freetype-devel,libtiff-devel,autoconf,gettext-devel,libtool

三:安裝 snmp的時候出現的錯誤:
1>/bin/sed: can’t read /usr/lib/libbeecrypt.la: No such file or directory
libtool: link: `/usr/lib/libbeecrypt.la’ is not a valid libtool archive
make[1]: *** [libnetsnmpmibs.la] Error 1
解決:以為缺少libbeecrypt.la ,libbeecrypt.so等共享庫,如:yum install libbeecrypt.la
2>/usr/bin/ld: cannot find -lelf
解決:ln -s /usr/lib/libelf.so.1 /usr/lib/libelf.so
3>/usr/bin/ld:can’t not find -lselinux
解決:缺少libselinux 和 libselinux-devel包,如:yum install libselinux

四:Rsync同步常見問題:
錯誤一:
@ERROR: auth failed on module xxxxx
rsync: connection unexpectedly closed (90 bytes read so far)
rsync error: error in rsync protocol data stream (code 12) at io.c(150)
解決:這是因為密碼設置錯了,無法登入成功,檢查一下rsync.pwd,看客服是否匹配。還有服務器端沒啟動rsync 服務也會出現這種情況。
錯誤二:
password file must not be other-accessible
continuing without password file
Password:
解決:這是因為rsyncd.pwd rsyncd.sec的權限不對,應該設置為600。如:chmod 600 rsyncd.pwd
錯誤三:
@ERROR: chroot failed
rsync: connection unexpectedly closed (75 bytes read so far)
rsync error: error in rsync protocol data stream (code 12) at io.c(150)
解決:這是因為你在 rsync.conf 中設置的 path 路徑不存在,要新建目錄才能開啟同步。
錯誤四:
rsync: failed to connect to 218.107.243.2: No route to host (113)
rsync error: error in socket IO (code 10) at clientserver.c(104) [receiver=2.6.9]
解決:對方?jīng)]開機、防火墻阻擋、通過的網絡上有防火墻阻擋,都有可能。關閉防火墻,其實就是把tcp udp 的873端口打開。

五:軟件安裝的時候常出現的問題:
configure: error: …No recognized SSL/TLS toolkit detected
# yum -y install openssl-devel

configure: error: no acceptable cc found in $PATH
yum -y install gcc-c++

configure: error: cannot find output from lex; giving up flex is not installed, install flex.
yum -y install flex

configure: error: xml2-config not found. Please check your libxml2 installation.
yum -y install libxml2-devel

configure: error: Cannot find OpenSSL’s
yum -y install openssl-devel

configure: error: Please reinstall the BZip2 distribution
yum -y install bzip2-devel

configure: error: Please reinstall the libcurl distribution - easy.h should be in /include/curl/
yum -y install curl-devel

configure: error: libjpeg.(a|so) not found.
yum -y install libjpeg-devel

configure: error: libpng.(a|so) not found.
yum -y install libpng-devel

configure: error: freetype2 not found!
yum -y install freetype-devel

configure: error: Unable to locate gmp.h
yum -y install gmp-devel

configure: error: Cannot find pspell
yum -y install aspell-devel

libtool: link: cannot find the library `/usr/lib/libbeecrypt.la’ (librpmio.la: /usr/lib/libbeecrypt.la)
解決:缺少beecrypt包,如:
http://sourceforge.net/projects/beecrypt下載beecrypt-4.1.2.tar.gz
然后運行如下命令:
#tar -zxvf beecrypt-4.1.2.tar.gz
#./configure
#make
#make install

標簽:臨汾 甘孜 張掖 淄博 江蘇 透傳 延安 和田

巨人網絡通訊聲明:本文標題《linux系統維護常見錯誤記錄》,本文關鍵詞  linux,系統,維護,常見,錯誤,;如發現本文內容存在版權問題,煩請?zhí)峁┫嚓P(guān)信息告之我們,我們將及時溝通與處理。本站內容系統采集于網絡,涉及言論、版權與本站無關。
  • 相關文章
  • 下面列出與本文章《linux系統維護常見錯誤記錄》相關的同類信息!
  • 本頁收集關于linux系統維護常見錯誤記錄的相關信息資訊供網民參考!
  • 推薦文章