前面的文章中曾經發布了對指定IP進行批量端口掃描的方法和腳本,過PowerShell收發TCP和UDP消息包的方法以及通過PowerShell嘗試登錄SQLServer服務的方法,這構成了PSNet程序集用于通過PowerShell對網絡狀態進行操作。最近在不斷嘗試之下,找到了對指定范圍的IP段進行掃描和對端口進行掃描的方法,本文將會介紹如何通過PowerShell批量掃描IP及其對應的端口。
依然在PSNet程序集的基礎上進行擴展,首先在$env:PSSpace/PSNet/TCPOp下創建腳本文件Invoke-ScanIPPort.ps1,并在$env:PSSpace/PSNet/TCPOp/PSNet.psm1中添加對腳本文件的調用:
復制代碼 代碼如下:
. $env:PSSpace/PSNet/TCPOp/Invoke-ScanIPPort.ps1
首先對后面代碼中將會出現的變量進行介紹:
復制代碼 代碼如下:
-StartAddress[掃描的起始IP地址],與-EndAddress配合使用,【此參數必須】
-EndAddress[掃描的結束IP地址],【此參數必須】
-ResolveHost[是否嘗試對主機名嘗試進行解析]
-ScanPort[是否進行端口掃描],如果要掃描端口此選項必須
-AllPort[是否對所有端口進行掃描],范圍為1~65534(注意此選項掃描時間很長建議在選中單個IP的情況下進行使用,并且盡量少使用)
-StartPort[掃描的起始端口端口],與-EndPort配合使用,如果此選項與-Ports選項同時存在則-Port參數失效
-EndPort[掃描的結束端口]
-Ports掃描時默認掃描的端口,如果后續不帶參數則僅掃描21,22,23,53,69,71,80,98,110,139,111,389,443,445,1080,1433,2001,2049,
3001,3128,5222,6667,6868,7777,7878,8080,1521,3306,3389,5801,5900,5555,5901如果后續帶多個以逗號分割的多個數字則會掃描數字對應的端口,如果只掃描默認的端口,則不需此參數
-TimeOut超時時間,默認值為100ms(毫秒)
此函數的調用方式如下:
復制代碼 代碼如下:
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254#掃描IP段
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254 –ResolveHost#掃描IP段,并嘗試解析IP對應主機名
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254 -ResolveHost –ScanPort#掃描IP段,并嘗試掃描默認端口
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254 -ResolveHost -ScanPort -TimeOut 50 #掃描IP段,嘗試掃描默認端口,端口掃描50ms超時
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254 -ResolveHost -ScanPort -Port 80 #掃描IP段,并嘗試掃描80端口
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.1 -ResolveHost -ScanPort –AllPort#掃描ip,并嘗試掃描所有1~65534之間端口
Invoke-ScanIPPort -StartAddress 192.168.10.1 -EndAddress 192.168.10.254 -ScanPort -StarPort 21 -EndPort 81#掃描IP段之間主機所有21至81之間的端口
上圖來一張掃描過程中的圖片
掃描結束后的結果:
代碼如下:
復制代碼 代碼如下:
=====文件名:Invoke-ScanIPPort.ps1=====
function Invoke-ScanIPPort {
Param(
[parameter(Mandatory = $true,
Position = 0)]
[ValidatePattern("\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b")]
[string]$StartAddress,
[parameter(Mandatory = $true,
Position = 1)]
[ValidatePattern("\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b")]
[string]$EndAddress,
[switch]$ResolveHost,
[switch]$ScanPort,
[switch]$AllPort,
[int]$StartPort,
[int]$EndPort,
[int[]]$Ports = @(21,22,23,53,69,71,80,98,110,139,111,389,443,445,1080,1433,2001,`
2049,3001,3128,5222,6667,6868,7777,7878,8080,1521,3306,3389,5801,5900,5555,5901),
[int]$TimeOut = 100
)
Begin {
$ping = New-Object System.Net.Networkinformation.Ping
}
Process {
foreach($a in ($StartAddress.Split(".")[0]..$EndAddress.Split(".")[0])) {
foreach($b in ($StartAddress.Split(".")[1]..$EndAddress.Split(".")[1])) {
foreach($c in ($StartAddress.Split(".")[2]..$EndAddress.Split(".")[2])) {
foreach($d in ($StartAddress.Split(".")[3]..$EndAddress.Split(".")[3])) {
$ip = "$a.$b.$c.$d"
write-progress -activity "ScanIP Ping" -status "$ip" -percentcomplete (($d/($EndAddress.Split(".")[3])) * 100)
$pingStatus = $ping.Send("$ip",$TimeOut)
if($pingStatus.Status -eq "Success") {
if($ResolveHost) {
write-progress -activity ResolveHost -status "$ip" -percentcomplete (($d/($EndAddress.Split(".")[3])) * 100) -Id 1
$getHostEntry = [Net.DNS]::BeginGetHostEntry($pingStatus.Address, $null, $null)
}
if($ScanPort) {
if($AllPort) {
$Ports = @(1..65534)
}
if($StartPort -ne $null -and $EndPort -ne $null){
$Ports = @($StartPort..$EndPort)
}
$openPorts = @()
for($i = 1; $i -le $Ports.Count;$i++) {
$port = $Ports[($i-1)]
write-progress -activity "PortScan[$port]$result" -status "$ip" -percentcomplete (($i/($Ports.Count)) * 100) -Id 2
$client = New-Object System.Net.Sockets.TcpClient
$beginConnect = $client.BeginConnect($pingStatus.Address,$port,$null,$null)
if($client.Connected) {
$openPorts += $port
} else {
# Wait
Start-Sleep -Milli $TimeOut
if($client.Connected) {
$openPorts += $port
$length=$openPorts.length
$result="[find $length ports.Last port $port]"
}
}
$client.Close()
}
}
if($ResolveHost) {
$hostName = ([Net.DNS]::EndGetHostEntry([IAsyncResult]$getHostEntry)).HostName
}
# Return Object
if ($openPorts -ne $null)
{
write-host "IPAddress" "$ip"
if ($getHostEntry -ne $null)
{write-host "HostName" $getHostEntry}
write-host "Ports" $openPorts
}
}
}
}
}
}
}
End {
}
}
您可能感興趣的文章:- PowerShell小技巧之發送TCP請求
- PowerShell小技巧之嘗試ssh登錄
- PowerShell腳本開發之收發TCP消息包
- PowerShell腳本開發之收發UDP消息包
- PowerShell腳本開發嘗試登錄SQL Server
- PowerShell腳本開發之嘗試登錄ftp